Call For Free Estimate (650) 560-4646
Technicians available todayTap to call

Automatic Gate Repair in the Bay Area

Gate stuck, off-track, or motor dead? Call (650) 560-4646. A licensed tech calls you back within 15 minutes, and repair visits are usually scheduled within 2 hours across the Bay Area.

  • 4.9 stars across 150+ reviews
  • CA licensed contractor #1060180
  • Repair visits usually within 2 hours
  • All major brands: LiftMaster, DoorKing, FAAC, Viking

Specifically, we repair electric driveway gates, gate openers and access systems on swing, sliding and barrier gates. In addition, our own techs handle the motor, the electronics and the metalwork for homes, HOAs and businesses.

4.9/5
Average across 150+ reviews

What automatic gate repair covers

Automatic gate repair is the diagnosis and repair of the powered parts of a gate, meaning the operator or motor, the control board, the safety sensors and the access controls, along with the hinges, rollers, track and welds that let it move. In short, the goal is a gate that opens, closes and reverses safely on its own.

Based in San Jose, Automatic Gate Masters is a licensed contractor, and our own crew also repairs residential driveway gates, HOA entrances and commercial gates across seven Bay Area counties. Because one team works on the motor, the wiring and the metalwork, you do not need a separate electrician and welder for one stuck gate.

Above all, safety is part of every repair. In fact, California's building code calls for automatic gate operators listed to UL 325 and for gates built to ASTM F2200. That is why the photo eyes and automatic reversal are never optional extras, and why we test them before we leave.

Sources: UL 325, Standard for Door, Drapery, Gate, Louver, and Window Operators and Systems · ASTM F2200, Standard Specification for Automated Vehicular Gate Construction · California Building Code Section 3110. Also read our UL 325 and ASTM F2200 guide.

3,000+Projects done
10+Years in the Bay Area
7Bay Area counties
In-houseOur own crew
Start here

What is your gate doing?

First, pick the symptom that matches. Each card then lists the usual causes, one safe check you can do yourself, and a guide that goes deeper.

Gate won't open or close

In most cases, this comes down to lost power, a blocked or misaligned photo eye, a limit setting that drifted, or a failed control board.

Safe check: First, confirm the operator has power and that nothing sits in the gate's path.

Opener beeping or showing an error

In fact, beeps and display codes are the board reporting what it detected, such as an obstruction, a sensor fault or a weak battery.

Safe check: Count the beeps or write down the code, then look it up by brand.

Remote, keypad or intercom not working

Often, the cause is simply a dead remote battery, lost programming, a damaged antenna, or a keypad or intercom fault.

Safe check: First, try a second remote, or the keypad, before anything else.

Gate reverses or stops halfway

Here the safety system is doing its job, because a photo eye is dirty, out of alignment or loosely wired, or a safety edge is pressing against something.

Safe check: Wipe both photo eye lenses and make sure the two sensors still line up.

Sliding gate off track or grinding

On a slide gate, worn rollers, a bent or dirty V-track, loose guide rollers or a stretched drive chain are the usual cause, so the operator strains or stalls.

Safe check: Clear leaves and rocks from the track, but never lift a heavy gate back on by hand.

Swing gate sagging or arm damaged

Similarly, swing gates wear at the hinges, crack at the welds, shift at the post, or bend the operator arm.

Safe check: Look for a dragging leaf or a loose arm bracket, and then stop using the gate if it binds.

Power, battery or solar trouble

Then there are power faults, from a tripped breaker or a blown fuse to a tired backup battery or a solar panel that no longer keeps up.

Safe check: Check the breaker and the operator power switch, then notice whether the gate is slow or completely dead.

Gate was hit or damaged

Finally, a vehicle strike can bend the leaf, the hinges, the track or the operator arm, and it can also throw off the limits.

Safe check: Switch the operator off and keep people clear until a tech inspects it.

Still stuck after the safe check? Then call (650) 560-4646 or send the form, and never force a powered gate or bypass its sensors.

Gate opener repair for every major brand

In short, whatever motor is on your gate, we work on it. Below, for example, are the brands with their own repair page or a troubleshooting guide written by our techs.

LiftMaster LA500 swing gate operator

LiftMaster

For example, LA400, LA500, CSW24UL, CSL24UL and RSW12U operators, plus their photo eye and error code faults.

Viking F-1 swing gate operator

Viking

Likewise, swing and slide operators with the VFlex board, including LCD error messages and battery faults.

FAAC S800H hydraulic swing gate operator

FAAC

Also, hydraulic and electromechanical operators running the E024S and E124 control boards.

HySecurity SlideDriver 40 hydraulic slide gate operator

HySecurity

Meanwhile, commercial entrances run SlideDriver hydraulic slide operators and StrongArm barrier arms.

Mighty Mule

Similarly, residential swing and slide openers, including beep patterns, limit setup and the FM134 and FM135 remotes.

In addition, read our Mighty Mule troubleshooting.

Elite

Besides newer brands, we also work on older Elite SL3000 and CSW200 operators, and how to tell which board generation is on your gate.

In addition, read our Elite gate repair.

DoorKing

Finally, DoorKing operators and telephone entry systems, from a dead keypad to lost entry codes.

In addition, read our DoorKing entry systems.

We also work on Ramset, All-O-Matic, US Automatic and other operators. If you are not sure what you have, then send a photo of the motor label when we call back.

How a gate repair works

Here is what a repair visit looks like, as well as a few safe checks you can do before we arrive.

Your repair visit

From the first call to a gate that works again.

  1. 1

    Call or send the form

    First, tell us the brand if you know it and what the gate is doing, such as beeping, stopping halfway or not moving at all.

  2. 2

    On-site diagnosis

    After that, a licensed tech tests the power, the control board, the safety sensors, the limits and the hardware to find the real cause.

  3. 3

    Fix or written quote

    Then the tech explains what failed, and if parts are needed, you get a written quote before anything is ordered.

  4. 4

    Test and safety check

    Finally, we cycle the gate, adjust force and limits, and confirm the photo eyes and reversing work before we leave.

Call (650) 560-4646

Safe checks while you wait

None of these need tools, but each one helps the tech start in the right place.

  • First, check the breaker and the power switch on the operator.
  • Then wipe both photo eye lenses and clear anything in the gate's path.
  • Besides that, try a second remote or the keypad to rule out a dead remote battery.
  • Also note any beeps, blink pattern or error code on the board.
  • Finally, take a photo of the motor and its label, because the model number helps us bring the right parts.

Above all, never bypass or unplug the safety sensors, and never force a powered gate by hand. Instead, if it must be opened, follow the manual release steps in your opener's manual.

For deeper steps, see our gate won't open or close guide, since it is organized by symptom. For LiftMaster boards, the LiftMaster gate repair page also lists the error codes.

Reviews from Bay Area gate owners

4.9 average across 150+ reviews on Google, Yelp and Thumbtack

Daria Raimova6 months ago
★★★★★

Automatic Gate Masters installed a pedestrian gate at our commercial property in San Francisco, and we couldn't be happier. Matt managed the project professionally.

Sarha Glynn7 months ago
★★★★★

They replaced my old gate with a beautiful, secure one. The workmanship is excellent, and customer service was top-notch from start to finish.

Danny Luther3 months ago
★★★★★

Automatic Gate Masters installed three new gates for us, and the workmanship is outstanding. The gates are both beautiful and secure, giving us peace of mind.

Gate repair across the Bay Area

From our San Jose headquarters, we cover seven counties, so pick your county for local repair pages, or jump straight to a city below.

City gate repair pages

Specifically, in Santa Clara County: San Jose, Palo Alto, Campbell, Los Gatos and Saratoga.

Also, in San Mateo County: Atherton, Redwood City, Burlingame and Hillsborough.

Similarly, in Alameda County: Oakland, Fremont and Pleasanton.

Meanwhile, in Contra Costa County: Lafayette, Danville, Walnut Creek and Alamo.

Finally, in Marin County: San Rafael and Mill Valley.

View all service areas →

Automatic Gate Masters & Garage Doors · 877 S Winchester Blvd #350, San Jose, CA 95128 · (650) 560-4646

Real repairs, on video

These are short clips from recent Bay Area jobs, so you can see the work up close.

Repair clipSlide gate motor swapIn this case, the old slide operator was replaced and tuned.
Repair clipSwing gate realignmentHere a sagging swing gate was rehung so it closes level.
Repair clipAccess control installAlso, a new keypad and intercom were wired and set up.
FAQ

Gate repair questions

How soon can you come out for a gate repair?

Just call us, and then we will give you the next open repair slot. If the gate is stuck open, stuck closed or blocking a driveway, say so when you call, so we can plan the visit around it.

What gate opener brands do you repair?

We repair LiftMaster, Viking, FAAC, HySecurity, Mighty Mule, Elite, DoorKing, Ramset, All-O-Matic, US Automatic and other major brands, on both swing and slide gates. For brand steps, also see our LiftMaster gate repair page and the Viking and FAAC troubleshooting guides.

My gate will not open or close. What should I check first?

First, check that the operator has power and that nothing is blocking the photo eyes or the gate's path. After that, our gate won't open or close guide walks through more safe checks by symptom. If the gate still won't move, call us, and never force it or bypass the safety sensors.

Why is my gate opener beeping?

In most cases, the beeps are a code. Depending on the brand, a beep pattern can point to an obstruction, a sensor fault, a limit problem or a low battery. So count the beeps, then match them on our gate opener beep codes page, which covers seven brands.

Why does my gate reverse or refuse to close?

Usually, the safety system has detected something. For example, a dirty or misaligned photo eye, a loose sensor wire or a safety edge that touches something will stop or reverse the gate by design. So wipe the lenses and clear the path, and if it keeps happening, have a tech test the sensors.

How much does gate repair cost?

In short, it depends on the part that failed and the type of gate. For instance, a sensor realignment or a remote reprogram is a small job, while a new operator or control board costs more. Either way, the estimate is free and you get a written quote before any work begins.

Should I repair or replace my gate opener?

Generally, repair makes sense when the operator is in good shape and parts are still available. On the other hand, an older operator with a failed board, worn gears or no monitored safety sensors may be worth replacing, so we show you both options in writing.

Do you repair residential and commercial gates?

Yes. In fact, we repair residential driveway gates, HOA and apartment gates, and commercial gates, including swing, sliding, cantilever and barrier arm systems.

Is every repair safety tested?

Yes. Before we leave, we cycle the gate, adjust force and limits, and confirm the photo eyes and automatic reversal work as UL 325 intends. You can also read more in our UL 325 and ASTM F2200 guide.

Gate acting up? Let's get it working again

So call, or send the form with the symptom and your zip code. Then our San Jose office calls you back to set up a visit, and you get a written quote before any work starts.

Call (650) 560-4646
  • Office hours: Mon to Fri, 7:00 AM to 9:00 PM.
  • Prefer to text? You can also message us on WhatsApp (510) 849-7246.
  • Gate not moving right now? Meanwhile, the safe checks guide covers what you can try.
  • Licensed and insured: California contractor #1060180, and also A+ rated with the BBB.
Scroll to Top
Call WhatsApp