Call For Free Estimate (650) 560-4646
Gate Repair ยท Danville, CA

Gate Repair in Danville, CA

Licensed automatic gate repair for Danville estates and homes, from Blackhawk and Diablo to Greenbrook, Sycamore, and downtown Danville. Openers, sliding and swing gates, and access control. Licensed CA contractor and free written estimates.

4.9 across 150+ reviews Local dispatch Licensed #1060180 All brands serviced
Call (650) 560-4646
Get your free repair estimate
Tell us what the gate is doing and we typically respond within 1 business hour.











    ๐Ÿ”’ No spam. No obligation. Just a straightforward quote.

    4.9/5
    โ˜…โ˜…โ˜…โ˜…โ˜…
    Average across 150+ reviews
    Written by the licensed technicians at Automatic Gate Masters ยท CA Contractor #1060180Last updated July 22, 20264.9 average across 150+ reviews

    Automatic gate repair is the diagnosis and repair of the powered parts of a gate, the operator or motor, the control board, the safety sensors, and the access controls, along with the mechanical parts like hinges, rollers, track, and welds that let the gate move. The goal is a gate that opens, closes, and reverses safely on its own.

    When a gate in Danville stops working, it usually leaves a car stuck at an estate entrance or a driveway propped open. We fix that fast across the San Ramon Valley. Danville has a lot of gated properties, from the Blackhawk golf community and the custom estates of Diablo to the family neighborhoods of Greenbrook and Sycamore, and we service all of them. We repair every part of a residential or commercial gate: gate openers, control boards, safety sensors, and the metalwork itself, across Contra Costa County.

    A repaired gate has to be a safe gate. Every automatic gate operator must meet the UL 325 safety standard for opening, reversing, and entrapment protection, which is why the photo-eye sensors and auto-reverse are not optional extras. On every repair we cycle the gate, tune the force and limits, and confirm the safety sensors work before we leave.
    Danville gate and fence rules. Under the Danville Municipal Code, Section 32-22.11, a fence or hedge in the primary front-yard setback is limited to 3.5 feet, a secondary front-yard fence to 6 feet (set back 5 feet with landscaping), and retaining walls to 6 feet, or 3.5 feet in a front setback. Adding or replacing an automatic gate operator is electrical work that needs a permit. We work to these rules on every job.

    Sources: Danville Municipal Code, Section 32-22.11, Fencing and Retaining Walls ยท UL 325, Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems.

    Common Problems

    Gate problems we fix in Danville

    If your gate is doing any of these, it is a repair we handle every week.

    Gate will not open or close

    Dead power, a tripped safety sensor, a failed board, or a worn motor. We find the real cause and get you moving again.

    Grinding, dragging, or off track

    Worn rollers, a bent V-track, or a dragging sliding gate. We realign, replace hardware, and get it gliding smoothly.

    Opener or motor failure

    A hydraulic, chain, or screw-drive operator that hums, stalls, or is dead. We repair or replace it with the right unit.

    Remote, keypad, or intercom out

    Remotes that stopped, a dead keypad, or an intercom nobody can hear. We reprogram, repair, or upgrade the access.

    Call (650) 560-4646

    Gate repair across Danville and the San Ramon Valley. Free written estimate.

    Parts We Service

    What fails on an automatic gate

    The part that failed decides the fix. Here is what we diagnose and repair.

    PartCommon symptomOur fix
    Operator / motorHums, stalls, or dead; gate will not moveRepair or replace
    Control boardNo response, intermittent, or error lightsReplace board
    Safety sensorsGate reverses, will not close, or stays openRealign / replace
    Rollers & trackGrinding, dragging, or off the trackHardware & alignment
    Hinges & weldsSagging leaf, cracked joints, gate bindsWeld & rehang
    Remotes & keypadStopped working or code not acceptedReprogram / replace

    Not sure which part failed? That is what the free on-site diagnosis is for. Call (650) 560-4646.

    Our Process

    How a Danville gate repair works

    From the first call to a gate that opens on its own, handled by one crew.

    1

    Call and describe the problem

    Tell us what the gate is doing, whether it will not open, grinds, drifts off track, or ignores the remote. We dispatch a technician across the San Ramon Valley.

    2

    On-site diagnosis

    The technician tests the operator, control board, sensors, and mechanical parts, finds the real cause, and shows you what failed.

    3

    Fix or written quote

    Most repairs are done on the first visit from stocked parts. For larger jobs you get a written fixed quote before any work begins.

    4

    Test and safety check

    We cycle the gate, tune the force and limits, and confirm the photo-eyes and reversing meet UL 325 before we leave.

    Why Danville owners call AGM for gate repair

    Fast, local, and licensed, with the parts on the truck.

    • Gate repair across Danville and the San Ramon Valley
    • All brands: LiftMaster, DoorKing, FAAC, Ramset, Elite, Viking
    • Residential and commercial gate repair
    • Operators, boards, sensors, and metalwork in-house
    • Common parts stocked for first-visit repairs
    • Every repair safety tested to UL 325
    • Licensed CA contractor #1060180, fully insured
    • Free on-site diagnosis and written quote
    Real Reviews
    โ˜…โ˜…โ˜…โ˜…โ˜…
    4.9 average across 150+ total reviews
    100+ Google reviews

    What our customers say

    D
    Daria Raimova6 months ago
    โ˜…โ˜…โ˜…โ˜…โ˜…
    โ€œ

    Automatic Gate Masters installed a pedestrian gate at our commercial property in San Francisco, and we couldn't be happier. Matt managed the project professionally.

    S
    Sarha Glynn7 months ago
    โ˜…โ˜…โ˜…โ˜…โ˜…
    โ€œ

    They replaced my old gate with a beautiful, secure one. The workmanship is excellent, and customer service was top-notch from start to finish.

    D
    Danny Luther3 months ago
    โ˜…โ˜…โ˜…โ˜…โ˜…
    โ€œ

    Automatic Gate Masters installed three new gates for us, and the workmanship is outstanding. The gates are both beautiful and secure, giving us peace of mind.

    Call (650) 560-4646

    Talk to a licensed technician about your Danville gate.

    Where We Work

    Gate repair across Danville and the San Ramon Valley

    Fast local response from our San Jose shop on S Winchester Blvd.

    Blackhawk Diablo Greenbrook Westside Danville Sycamore San Ramon Alamo Contra Costa County

    Danville gate repair FAQ

    How soon can you come out for a gate repair in Danville?
    Yes. We cover Danville and the San Ramon Valley, including Blackhawk, Diablo, Greenbrook, Sycamore, and downtown Danville. For a gate that is stuck open, stuck closed, or blocking a driveway, call us and we will schedule the earliest open visit.
    What gate brands do you repair?
    We repair all major automatic gate brands, including LiftMaster, DoorKing, FAAC, Ramset, Elite, Viking, All-O-Matic, and US Automatic. We carry common operators, control boards, and parts on the truck, so most repairs are finished on the first visit.
    My gate will not open, what could be wrong?
    Common causes are a dead battery or lost power, a tripped or misaligned photo-eye safety sensor, a worn opener motor or stripped gear, a failed control board, or a mechanical problem like a bent track, seized roller, or cracked weld. We diagnose the real cause on site rather than swapping parts and guessing.
    How much does gate repair cost in Danville?
    It depends on the part that failed and the type of gate. A sensor alignment or remote reprogram is a small job, while a new operator or control board costs more. You get a written quote before any work begins, and the estimate is free.
    Do you repair both sliding and swing gates?
    Yes. We repair swing gates, including hinges, welds, and swing operators, and sliding gates, including rollers, V-track, cantilever hardware, chains, and slide operators. We service residential and commercial gates across Danville.
    Are there fence and gate height rules in Danville?
    Yes. Under the Danville Municipal Code, Section 32-22.11, a fence or hedge in the primary front-yard setback is limited to 3.5 feet, a secondary front-yard fence to 6 feet with a 5-foot setback and landscaping, and retaining walls to 6 feet, or 3.5 feet in a front setback. A new automatic gate operator is electrical work that needs a permit, and we work to these rules on every job.
    Do you fix gate openers and access control too?
    Yes. We repair and replace gate openers, remotes, keypads, loop detectors, and intercom and access control systems, and we can upgrade an older gate to a modern operator with app control if the existing one is beyond repair.

    Gate acting up in Danville? Let's fix it today

    Tell us what the gate is doing and we will send a technician with a free written estimate before any work begins.

    Scroll to Top
    Call WhatsApp