Driveway Gates in the Bay Area
Planning a new driveway gate? First, tell us the opening width and the look you want, and then we start from there.
- 4.9 across 150+ reviews
- CA Lic #1060180
- Up to 2-year labor warranty
- Free estimates
We design, fabricate and install swing, sliding and custom driveway gates in iron, steel, wood and modern panels across seven Bay Area counties, and we can also automate nearly any of them.
Get a free estimate · Swing or slide?Not sure where to start? First compare swing and sliding gates.
Photo: our modern gate project in Atherton
Driveway gates built for your opening
Written by the installers and technicians at Automatic Gate Masters, CA Contractor #1060180. Last updated November 3, 2026.
A driveway gate closes off the vehicle entrance to a property. It can swing or slide, it can be built from iron, steel, wood or modern panels, and it can open by hand or, if you prefer, with a motor.
Before anything else, every driveway gate we build starts with the opening: its width, its slope and how much room there is beside it. After that, the style, the material and the automation follow, and one crew handles the design, the fabrication and the install.
Want it automatic? Nearly any driveway gate on this page can also be motorized. Our automatic driveway gates page covers operators, solar kits and access control in detail.
For more of our work, see also the gate gallery and on our custom gate design page.
Swing, slide or custom: choosing driveway gates
Six questions we work through with you before any driveway gate is drawn.
Swing gates
Swing gates suit wide, fairly level drives with room for the leaves to open. They also come as one leaf or a matched pair, and they are usually the simplest layout to automate.
Related: swing gates.
Sliding gates
A sliding gate runs along the fence line, so it suits short, sloped or tight drives where a swing leaf would hit the ground or a parked car. However, it does need clear space beside the opening.
Related: sliding gates.
Sloped driveways
On a slope, a swing leaf can drag on the uphill side. In that case we slide the gate, open the leaves downhill or shape the bottom rail to the grade.
Related: custom gate design.
Privacy or see-through
Solid panels give privacy, while open iron or spaced slats let light and air through. However, several cities cap solid fences in front yards, which can decide the design.
Related: wrought iron gates.
A matching walk gate
A pedestrian gate beside the driveway gate means you do not have to cycle the big gate for every visitor or delivery, and it can also share the same keypad or intercom.
Related: access control.
Fire access hardware
Gates across fire access need an approved way to open in an emergency, and many fire districts also want a Knox switch or lock box. So we plan that hardware before fabrication.
Related: automatic driveway gates.
Not sure which layout fits? Send a photo of the opening, and then we will suggest one.
Driveway gate materials and finishes
Every material can be paired with a swing or sliding layout, and with an operator if you want one.
IronWrought iron and ornamental
Classic iron gates with scrolls, finials or clean pickets, finished so they resist rust.
SteelSteel and Corten
Steel frames hold solid, slatted or pre-rusted Corten panels, so the gate reads as modern.
WoodCedar and hardwood
Warm wood panels sit in a steel frame, so the frame helps the gate stay straight as the wood moves.
Laser-cutLaser-cut panels
First we draw the pattern, tree or house number with you, and then it is cut into steel panels.
ModernModern panel gates
Frosted, slatted or mixed-material panels are chosen so the gate matches contemporary architecture.
AutomationOpeners and access
Swing and slide operators, solar kits, keypads and intercoms are also covered in depth on our automatic gates page.
If you want motors, solar or keypads, see automatic driveway gates. However, if an existing gate needs work, see gate repair.
What our customers say
4.9 average across 150+ reviews on Google, Yelp and Thumbtack
These excerpts come from our Google reviews, word for word, from customers who had new gates designed and built.
“Everyone I dealt with showed up when they said they would, they were easy to communicate with, had very good design sense, did immaculate work, the estimate was clear and easy to read, and the billing was prompt and easy to manage with their online system.”
Excerpt from a Google review“Impressive work and very professional. They got my gate fabricated and installed fairly quick.”
Excerpt from a Google review“The workmanship is excellent, and we have received many compliments on our new fencing and gates.”
Excerpt from a Google reviewRules that shape driveway gates
City and fire rules differ across the Bay Area. That is why we check them for your address before a driveway gate is designed.
Height, setback and permit examples
- Front-yard limits vary: for example, 3 feet in Monte Sereno, 42 inches in Brentwood and 4 feet in Hayward for homes.
- Some cities allow a taller entry gate: in Santa Cruz, for example, one street-side gate per frontage can reach 10 feet wide and 10 feet high.
- Setbacks from the road: Portola Valley sets entry gates back at least half the front yard in its one-acre-plus districts.
- Fire setbacks: some fire codes also want gates 30 feet off the street, such as Con Fire in Brentwood and County Fire areas of Santa Cruz County.
- Sight lines: corner visibility triangles (and driveway triangles in Santa Cruz County) cap anything inside them at about 3 feet, so drivers can see cross traffic.
- Permits: repairs rarely need one, while a new, taller or moved gate can need planning review, a building permit or an electrical permit, depending on the city.
Sources and details: our Monte Sereno, Brentwood, Hayward, Portola Valley and Santa Cruz pages.
Fire access rules for driveway gates
Fire codes also shape driveway gates that cross fire access roads. Depending on the district, they can call for:
- First, an approved means of emergency operation for gates across fire access (California Fire Code 503.6).
- In addition, electric operators listed to UL 325, and automatic gates built to ASTM F2200.
- A Knox key switch or lock box in many districts, such as Woodside Fire and Central Fire in Santa Cruz County.
- A minimum clear width in some districts, such as 14 feet in Santa Cruz County Fire areas and 20 feet (16 for one or two homes) under Con Fire.
So we confirm the fire district for your address before the gate is designed.
Source: California Fire Code Section 503.6. District details are on our Portola Valley, Brentwood and Santa Cruz pages.
What we check before building driveway gates
Height and style: the front-yard height limit and any opacity rule, because together they can decide between solid and open panels.
Placement: the setback from the road, the sight lines at the driveway and any fire access width, so a car can pull in off the street.
Approvals: HOA design rules, planning review and electrical permits for a new operator, and when they apply, we flag them in the quote.
Bay Area towns where we build driveway gates
- Atherton
- Los Altos Hills
- Woodside
- Portola Valley
- Saratoga
- Los Gatos
- Palo Alto
- San Jose
- Fremont
- Danville
- Alamo
- Lafayette
- Walnut Creek
- Hillsborough
- San Rafael
- Santa Cruz
See the work up close
These short clips show install and adjustment work on our gates, so you can see how the hardware goes in.
How a new driveway gate comes together
Four steps take you from the first idea to a finished gate, and the list beside them helps us quote faster.
From idea to installed gate
What happens after you reach out.
- 1
Tell us about the opening
Share the width, the slope and the style you like, and send photos if you can.
- 2
We measure and design
First we measure the opening and the posts, and then we draw the gate and its hardware.
- 3
You approve the price
Every quote is in writing, and fabrication starts only after you approve it.
- 4
Built, installed and tested
We install the gate and any operator, and then we check that it reverses on contact.
What to have ready
None of it is required, but each item helps us quote faster.
- First, photos of the opening from the street and from the drive.
- The rough width of the opening and whether the drive slopes.
- Pictures of gate styles you like, even from other houses.
- Also, any HOA design rules that apply to your street.
- Where the nearest power is, if you want the gate automated.
Replacing an old gate? If the old one is stuck, see our manual opening guide until the new one goes in.
Already have a gate that needs work? Our gate repair page and troubleshooting guide cover that side.
Driveway gates: common questions
How much does a driveway gate cost?
Swing or sliding: which driveway gate is better?
How long does a custom driveway gate take?
Can you automate a driveway gate later?
Do I need a permit for a new driveway gate?
What warranty comes with a new driveway gate?
Do you build matching walk gates and fences?
Where do you build driveway gates?
Driveway gates across the Bay Area
From our San Jose office, the same crew builds driveway gates across seven Bay Area counties. So choose your county for local pages and projects.
Gate installation pages by town
Local installation pages: Atherton, Los Altos Hills, Woodside, Saratoga, Los Gatos, Danville, Lafayette and Walnut Creek.
Automatic Gate Masters & Garage Doors · 877 S Winchester Blvd #350, San Jose, CA 95128 · (650) 560-4646
Planning driveway gates? Let's design yours
First, call the office or send the form with a line about the opening. After that, we measure, and you approve a written quote before anything is built.
Call (650) 560-4646- Office hours: Mon to Fri, 7:00 AM to 9:00 PM.
- Rather text? Message us on WhatsApp (510) 849-7246.
- Gate stuck right now? Try the safe checks guide first.
- Licensed and insured: California contractor #1060180, A+ rated with the BBB.









