Call For Free Estimate (650) 560-4646

Commercial Gate Installation and Repair in the Bay Area

Gate down at your property? Call us. Commercial accounts get priority service. Planning a new entry? We size it to your traffic before we quote.

  • 4.9 on Google, Yelp, Thumbtack
  • CA Lic #1060180
  • Built to UL 325 Class II to IV
  • Maintenance plans

We install heavy slide and cantilever gates, barrier arms, heavy-duty swing gates and ADA pedestrian gates, as well as access control, for HOAs, apartments, office parks, warehouses and industrial sites.

4.9/5
Average across 150+ reviews

Commercial gates built for daily traffic

Written by the installers and technicians at Automatic Gate Masters, CA Contractor #1060180. Last updated November 6, 2026.

Automatic Gate Masters installs, services and repairs commercial gates as well as access control for HOAs, apartment and condo complexes, office parks, warehouses, industrial facilities, storage sites and public sites across the Bay Area.

About half of our commercial work is new installation, while the other half is repairs and service contracts. Because a busy site can cycle the gate 500 times a day or more, we size the operator and the safety devices to the traffic.

Recent commercial jobs: a logistics facility slider in Oakland, an HOA entry system with a barrier arm in San Jose, a warehouse perimeter gate in Milpitas, and a telephone entry conversion for an apartment complex in Sunnyvale.

Gate stuck right now? Jump to commercial gate repair.

Commercial gate types and traffic sizing

The property, the traffic and the people walking through decide the gate, so we check all three before we recommend one.

The commercial gates we install most

  • Heavy slide and cantilever gates: for sites such as warehouses, logistics yards, storage units and perimeter fencing.
  • Barrier arm gates: for parking lots and office parks, as well as apartment entry lanes.
  • Heavy-duty dual swing gates: often chosen for HOA and apartment entrances.
  • ADA pedestrian gates: built into the entry, so that people walk through without using the vehicle gate.

How we size for traffic

  • Low traffic: under 100 cycles a day.
  • Medium traffic: 100 to 500 cycles a day.
  • High traffic: 500 to 1,500 cycles a day or more.
  • Anti-tailgating: interrupt loops with anti-tailgate and quick-close settings, so that the gate pauses for a following car and closes as soon as the lane clears, plus fast-closing barrier arms.

Commercial gate repair: the fixes we make most

High-cycle gates wear in predictable places, which is why our maintenance plans check them first.

Worn drive chains

Busy gates wear chains out faster, until the gate jerks, stalls or the chain jumps the sprocket.

Damaged V-track and rollers

Trucks and constant cycling wear the track and rollers until the gate drags and the operator works harder.

Vehicle strike damage

A strike can bend the gate, the posts or a barrier arm, and then the operator and safety devices need checking too.

Blown loop detectors

When a loop or its detector fails, the gate can stop opening for exiting cars or stay open until it is repaired.

Arm wear from heavy use

Barrier arms and swing operator arms wear out on high-cycle sites, so we replace them before they fail.

Call (650) 560-4646

Commercial accounts get priority service. Urgent repairs usually take 1 to 3 business days, and we can also work after hours.

Commercial operators and code

For high-traffic sites, we recommend continuous-duty DC operators with battery backup and variable speed control, so that the gate lasts through heavy cycling.

The operators we install

  • LiftMaster IHSL24UL and INSL24UL: industrial slide operators for UL Class II to IV sites; the IHSL24UL is rated up to 90 feet or 5,500 pounds and the INSL24UL up to 70 feet or 2,200 pounds, with anti-tailgate and quick-close modes (INSL24UL sheet).
  • HySecurity SwingSmart and LiftMaster CSW24UL: swing operators for heavy leaves; the SwingSmart is rated from 1,300 pounds at 12 feet to 600 pounds at 20 feet (spec sheet).
  • DoorKing 9150 and LiftMaster CSL24UL: slide operators for lighter commercial gates, up to 1,500 pounds (CSL24UL to 50 feet, 9150 at 1 HP to 45 feet).
  • LiftMaster Mega Arm: barrier arms from 12 to 17 feet that open in 2.5 seconds, rated for continuous duty and up to 6,000 cycles a day with the 12, 14 or 15 foot arms the data sheet lists for that rating (data sheet).
  • DoorKing 1601: a single-lane barrier arm up to 14 feet, for UL Class II to IV sites (cut sheet).

Ratings come from the manufacturers' data sheets, and we match the operator to the gate's weight, length and traffic.

What a commercial gate must meet

  • UL 325 Class II, III or IV: Class II covers multi-family housing and sites open to the public, Class III industrial sites closed to the public, and Class IV guarded sites with security staff. Every automated gate also needs monitored entrapment protection.
  • ASTM F2200: screened frames and covered rollers on slide gates, as LiftMaster's manuals reprint the standard.
  • Pedestrian access: a separate pedestrian gate, which on an accessible route follows the ADA standards for doors, with at least 32 inches of clear width.
  • Fire access: Knox key switches, as well as Opticom strobe sensors where the local fire agency requires them.
  • Approvals: city commercial permits, as well as HOA or property manager design approval.

Sources: DASMA's UL 325 data sheet (TDS 353) for the classes, ASTM F2200 as LiftMaster reprints it, and the ADA standards linked above.

How a commercial gate project runs

Four steps take a commercial entry from the first walk-through to a working gate.

From site visit to working gate

What happens after you call.

  1. 1

    Site visit

    We count the traffic, measure the openings and check power, fire access and pedestrian routes before we design anything.

  2. 2

    Written proposal

    You approve a written proposal, since the gate type, the operator class and the access control set the price.

  3. 3

    Permits and approvals

    We help with city commercial permits, as well as HOA or property manager design approval.

  4. 4

    Install and test

    We install, program the loops and access control, and run full cycles before we hand the site over.

Call (650) 560-4646

Timing and service

Typical times for our crews.

  • Urgent repairs, operator swaps and access upgrades: usually 1 to 3 business days, while full projects take longer.
  • Custom commercial gate and entry system: usually 3 to 6 weeks, because we fabricate the gate first.
  • Scheduling: during business hours, or after hours and on weekends, so that the site stays open.
  • Maintenance plans: quarterly or semi-annual visits, before wear stops the gate.

What our customers say

4.9 average across 150+ reviews on Google, Yelp and Thumbtack

Commercial gate questions

Which commercial gate is right for my property?

It depends on traffic as well as space. For example, warehouses and perimeter fences usually take a heavy slide or cantilever gate, while parking lots and entry lanes take barrier arms, and HOA entrances often choose a heavy dual swing gate.

How do you size a gate operator for traffic?

We estimate daily cycles. Under 100 is low, 100 to 500 is medium, and 500 to 1,500 or more is high. For high traffic, we use continuous-duty DC operators such as the LiftMaster IHSL24UL or HySecurity, with battery backup.

How do you stop tailgating at a commercial gate?

We use interrupt loops with anti-tailgate and quick-close settings, so that the gate pauses for a following car and closes as soon as the lane clears. On parking entries, fast-closing barrier arms also help.

What access control do you install?

We install systems such as DoorKing or CellGate telephone and cellular entry, fob and card readers, commercial keypads, RFID vehicle tags, license plate reader cameras, and Knox switches for the fire department.

What codes apply to a commercial gate?

Commercial gates fall under UL 325 Class II, III or IV as well as ASTM F2200. They also need a separate pedestrian gate, fire department access, and often a city permit and HOA or property manager approval.

Do commercial pedestrian gates need to meet ADA?

Yes, as long as the gate is on an accessible route, because it then follows the ADA standards for doors, including at least 32 inches of clear width and hardware usable with one hand.

Do you offer maintenance plans for businesses and HOAs?

Yes. We offer quarterly or semi-annual preventive maintenance, as well as priority service for commercial accounts.

Can you work without shutting down our entrance?

Yes. We schedule work around business hours, or after hours and on weekends, so that the site stays open.

Commercial gates across the Bay Area

Our crews work in all seven Bay Area counties from our offices in San Jose and San Ramon. For local repair pages, choose your county.

All service areas

Automatic Gate Masters & Garage Doors · 877 S Winchester Blvd #350, San Jose, CA 95128 · (650) 560-4646

San Ramon office · 2010 Crow Canyon Place, Suite 100, San Ramon, CA 94583 · (925) 690-1010

Securing a commercial property? Let's talk

Call or send the form, and we will walk the site, count the traffic and send a written proposal.

Call (650) 560-4646
  • Office hours: Mon to Fri, 7:00 AM to 9:00 PM.
  • Rather text? Send photos on WhatsApp (510) 849-7246.
  • Property manager or HOA board? Ask about a maintenance plan, so the gate is checked before it fails.
  • Licensed and insured: California contractor #1060180, A+ rated with the BBB.
Scroll to Top
Call WhatsApp