In many cases, yes. Los Altos Hills gate requirements depend on the gate location, height, setback, visibility, and electrical work. The town sets specific rules for gates in the road setback, and we verify the current requirements before installation. A gate in the setback must sit at least 30 feet from the road centerline, where an open gate can be up to 4.5 feet and a solid gate up to 3 feet, and a 6-foot gate generally needs about 45 feet of setback if open or 60 feet if solid. Anything taller or closer needs a variance, and gates behind the setback line are not held to those limits. We design to the code and pull the permits the gate and automation need.

Los Altos Hills is served by the Los Altos Hills County Fire District and Santa Clara County Fire, so a gated driveway generally needs an approved Knox key box and a gate that opens on a power failure, either by battery backup or manual release, so crews are never locked out. We install the Knox box and fail-safe opening as part of the automation.

Every automatic gate project is custom quoted because the final cost depends on the gate size, material, design, driveway slope, site preparation, electrical access, opener type, intercom, access control, permits, and hardware. Simple opener or access-control upgrades are usually much less involved than a full custom gate build. We provide a free on-site estimate and a written quote so you know the exact cost before moving forward.

Wide, level entrances can take a dual swing, but many Los Altos Hills driveways climb a slope or share a private lane, where a sliding gate is the better fit because it does not need flat room to swing. We recommend the right type during the free on-site assessment.

Yes. We install keypads, video intercoms, app entry, and camera integration from DoorBird, CellGate, LiftMaster, and Ubiquiti, set back from the road so a vehicle clears the street while the gate opens, and paired with the fire district's Knox access.

Adding an opener and access control to an existing gate is usually one day. A full custom hillside gate with fabrication, fresh wiring, and intercom takes several days, and long or remote driveways can add time for power and trenching. We give a clear timeline with your written estimate.